Grease

Showing 1–9 of 14 results

  • amsoil High-Viscosity Lithium-Complex Synthetic Grease

    High-Viscosity Lithium-Complex Synthetic Grease

    (GVC)

    APPLICATION MAINTENANCE

    Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Prevent over-greasing as this can result in excessive heat buildup. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

    COMPATIBILITY

    AMSOIL High-Viscosity Synthetic Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of AMSOIL High-Viscosity Synthetic Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.

  • Amsoil Semi-Fluid 00 Synthetic EP Grease Formulated to Lubricate and Protect Agricultural and Commercial Equipment

    Semi-Fluid 00 Synthetic EP Grease

    (GSF)

    Application Recommendations

    AMSOIL Semi-Fluid Synthetic EP Grease helps solve problems associated with leaky gearboxes and difficult-to-service applications in industrial and fleet markets. It is primarily used in grease-filled cases where conventional semi-fluid greases do not provide adequate lubricant life or protection. AMSOIL Semi-Fluid Synthetic EP Grease is the primary grease recommendation for truck wheel hubs as outlined in RP 631B, issued by The Technical and Maintenance Council of the American Trucking Association.

  • amsoil Spray Grease

    Spray Grease

    (GSP)

    **NOT AVAILABLE IN CANADA

    Applications

    Hinges

    Industrial Chains

    Latches

    Slides

    Winches

    Overhead Door Tracks

    Thrust Bearings

    Gears

    Cables

    Nuts/Bolts

    Locks

    Guide Rails

    Springs

    Bushings

    Ball Joints

    Pivot Points and all external moving parts

  • amsoil Arctic Synthetic Grease

    Arctic Synthetic Grease

    (GEC)

    Performance Features

    Outstanding cold-temperature pumpability

    Excellent mechanical stability

    Superior protection against wear and corrosion

    Long service life

    Withstands high loads and pressures

    Application Recommendation

    AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty automotive and industrial equipment, chassis, bearings, off-road and heavy equipment operating in arctic climates.

  • amsoil Synthetic Fifth-Wheel Grease

    Synthetic Fifth-Wheel Grease

    (FWG)

    Application Recommendations

    AMSOIL Synthetic Fifth-Wheel Grease is recommended for fifth-wheel and ball hitches used with over-the-road truck, travel/camper, horse, heavy-equipment and hobby trailers. It is also recommended for all open gear applications.

    Compatibility

    AMSOIL Synthetic Fifth-Wheel Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.

  • amsoil X-Treme Synthetic Food Grade Grease

    X-Treme Synthetic Food Grade Grease

    (GXC)

    APPLICATION RECOMMENDATIONS

    AMSOIL X-Treme Synthetic Food-Grade Grease is designed for use in food service and pharmaceutical industry equipment such as preparation, processing and packaging machinery where there is a possibility of incidental contact.

    APPLICATION MAINTENANCE

    Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Prevent over-greasing as this can result in excessive heat buildup. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

  • amsoil Synthetic Water Resistant Grease

    Synthetic Water Resistant Grease

    (GWR)

    COMPATIBILITY

    AMSOIL Synthetic Water-Resistant Grease is compatible with many other types of greases. However, it is recommended that, when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Water-Resistant Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.

  • amsoil Synthetic Multi-Purpose Grease NLGI #2

    Synthetic Multi-Purpose Grease NLGI #2

    (GLC)

    Reduces friction and wear in high-speed, high-temperature components like wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #2 is the primary wheel bearing recommendation.

  • Amsoil Synthetic Polymeric Truck, Chassis and Equipment Grease, NLGI #2

    Synthetic Polymeric Truck, Chassis and Equipment Grease, NLGI #2

    (GPTR2)

    APPLICATIONS

    AMSOIL Truck, Chassis and Equipment Grease is ideal for mixed fleets that operate in severe service. It is recommended for heavy-duty over-the-road trucks and trailers, delivery fleets, dump trucks, refuse haulers, utility fleets, emergency service vehicles, sewer and septic trucks, snow removal vehicles, wreckers, municipal service vehicles, equipment haulers, cement mixer trucks, airport support vehicles and more. It provides exceptional performance in heavily loaded chassis grease points, wheel bearings, axle assemblies, universal joints, pivot pins, fifth-wheel hitch plates, steering linkages, spring pins, king pins, ball joints, water pump bearings and other greased heavy-duty components.

    COMPATIBILITY

    AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease is compatible with many other types of grease. However, it is recommended that when changing greases, the equipment be cleaned of the old grease or flushed with a liberal amount of Synthetic Polymeric Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Any grease compatibility questions should be referred to your AMSOIL Dealer or AMSOIL Technical Services at (715) 399-TECH).

    APPLICATION MAINTENANCE

    Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.