Hydraulic Oil

APPLICATIONS & SPECIFICATIONS
The correct viscosity grade of AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy. It is recommended for all types of applications requiring the following industry and equipment specifications:

Stock Code	HVH	HVI	HVJ
Parker Hannifin (Denison) HF-0, HF-1, HF-2	X	X	X
Vickers* I-286-S, M-2950-S	X	X	X
DIN 51524 Parts 2 & 3	X	X	X
Cincinnati Milacron* P-68	X
Cincinnati Milacron P-70		X
Cincinnati Milacron P-69			X

Synthetic Multi-Viscosity Hydraulic Oil – ISO 46

(HVI)

APPLICATIONS & SPECIFICATIONS
The correct viscosity grade of AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy. It is recommended for all types of applications requiring the following industry and equipment specifications:

Stock Code	HVH	HVI	HVJ
Parker Hannifin (Denison) HF-0, HF-1, HF-2	X	X	X
Vickers* I-286-S, M-2950-S	X	X	X
DIN 51524 Parts 2 & 3	X	X	X
Cincinnati Milacron* P-68	X
Cincinnati Milacron P-70		X
Cincinnati Milacron P-69			X

Synthetic Multi-Viscosity Hydraulic Oil – ISO 32

(HVH)

APPLICATIONS & SPECIFICATIONS
The correct viscosity grade of AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy. It is recommended for all types of applications requiring the following industry and equipment specifications:

Stock Code	HVH	HVI	HVJ
Parker Hannifin (Denison) HF-0, HF-1, HF-2	X	X	X
Vickers* I-286-S, M-2950-S	X	X	X
DIN 51524 Parts 2 & 3	X	X	X
Cincinnati Milacron* P-68	X
Cincinnati Milacron P-70		X
Cincinnati Milacron P-69			X

aMSOIL Synthetic Anti-Wear Hydraulic Oil - ISO 22

Synthetic Multi-Viscosity Hydraulic Oil – ISO 22

(HVG)

APPLICATIONS & SPECIFICATIONS
The correct viscosity grade of AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy. It is recommended for all types of applications requiring the following industry and equipment specifications:

Stock Code	HVH	HVI	HVJ
Parker Hannifin (Denison) HF-0, HF-1, HF-2	X	X	X
Vickers* I-286-S, M-2950-S	X	X	X
DIN 51524 Parts 2 & 3	X	X	X
Cincinnati Milacron* P-68	X
Cincinnati Milacron P-70		X
Cincinnati Milacron P-69			X

Synthetic Anti-Wear Hydraulic Oil – ISO 46

(AWI)

Application Recommendation
The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.

AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.

* Not compatible with phosphate ester, silicone or water-based fluids.

AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:

Denison HF-0, HF-1 and HF-2
Vickers M-2950-S and I-286-S
Cincinnati Milacron P-68, P-69 and P-70
U.S. Steel 127
Racine, variable volume vane pumps
DIN 51524, Parts 2 and 3 HLP22-HLP46
SEB 181222 HLP22-HLP68
ASTM D-6158 HV
AFNOR E 48-603*
Ford M6C32
GM LH-04-1, LH-06-1 and LH-15-1
Lee Norse 100-1
Jeffrey No. 87
BF Goodrich 0152
Commercial Hydraulics*

* Except for PM-500 series silver-containing pumps which require R&O additive systems.

Synthetic Anti-Wear Hydraulic Oil – ISO 32

(AWH)

Application Recommendation
The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.

AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.

* Not compatible with phosphate ester, silicone or water-based fluids.

AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:

Denison HF-0, HF-1 and HF-2
Vickers M-2950-S and I-286-S
Cincinnati Milacron P-68, P-69 and P-70
U.S. Steel 127
Racine, variable volume vane pumps
DIN 51524, Parts 2 and 3 HLP22-HLP46
SEB 181222 HLP22-HLP68
ASTM D-6158 HV
AFNOR E 48-603*
Ford M6C32
GM LH-04-1, LH-06-1 and LH-15-1
Lee Norse 100-1
Jeffrey No. 87
BF Goodrich 0152
Commercial Hydraulics*

* Except for PM-500 series silver-containing pumps which require R&O additive systems.

Amsoil Synthetic Multi-Viscosity Hydraulic Oil - ISO 22

Synthetic Anti-Wear Hydraulic Oil – ISO 22

(AWG)