Showing all 5 results
Semi-Synthetic Bar and Chain Oil(ABC)
Ideal for chainsaws and bicycle chains
Synthetic 2-Stroke Injector Oil(AIO)
AMSOIL Synthetic 2-Stroke Injector Oil is recommended for use in all two-stroke outboard motor and snowmobiles. Meets the requirements for warranty protection protection by BRP®/Evinrude®/Johnson®/Ski-Doo® • Polaris® • Mercury® • Arctic Cat® • Yamaha® • Suzuki® • Kawasaki® • Mariner® • Force®
Use as injection oil or 50:1 pre-mix (2.6 oz. per U.S. gallon of gas).
For Evinrude factory-lean setting, use AMSOIL HP Marine Synthetic 2-Stroke Oil.
SABER® Professional Synthetic 2-Stroke Oil(ATP)
SABER Professional is specifically designed for handheld pre-mix two-stroke power equipment including, but not limited to, chainsaws, trimmers, blowers, brush cutters, edgers and shredder vacs.
JASO FD, ISO-L-EGD, API TC
Use at conventional mix ratios or the SABER® Ratio,™ regardless of the mix ratio specified for the equipment. For maximum benefit, use the SABER Ratio.
MIX RATIO OIL FUEL Conventional 32:1 4.0 OZ 1 U.S. gallon Conventional 40:1 3.2 OZ 1 U.S. gallon Conventional 50:1 2.6 OZ 1 U.S. gallon SABER® Ratio™ 80:1 1.6 OZ 1 U.S. gallon SABER® Ratio™ 100:1 1.3 OZ 1 U.S. gallon
Dominator® Synthetic 2-Stroke Racing Oil(TDR)
Racers can’t win what they don’t finish. That’s why AMSOIL formulators built DOMINATOR® 2-Stroke Racing Oil. This complex blend of oils and additives directly addresses the heat, pressure and friction of race-engineered engines. These engines operate on the edge, yet engine reliability is critical. DOMINATOR does an outstanding job protecting high-performance engines. It adds durability that professional racing teams depend on and delivers confidence so engines can be pushed to the limit.
• Excellent film strength for high-heat, high-rpm motors
• Anti-friction formula for maximum power
• Burns clean; helps prevent ring sticking and plug fouling
• Protects coated and non-coated racing pistons
INTERCEPTOR® Synthetic 2-Stroke Oil(AIT)
AMSOIL INTERCEPTOR Synthetic 2-Stroke Oil is engineered for use in direct-fuel-injected (DFI), electronic-fuel-injected (EFI) and carbureted two-stroke snowmobiles, including those made by Polaris*, BRP*/Ski-Doo* (Rotax* E-TEC* engines), Arctic Cat* (C-TEC 2) and Yamaha*.
Use where API TC oils are specified. Use as injection oil or 50:1 premix (2.6 oz. per U.S. gallon of gas). INTERCEPTOR is compatible with most conventional and synthetic two-stroke oils; however, for best performance, mixing oils should be minimized.