Snowmobiles

Showing all 8 results

  • Amsoil Formula 4-Stroke Power Sports Synthetic Motor Oil

    Formula 4-Stroke Power Sports Synthetic Motor Oil

    (AFF)




    APPLICATIONS AND RECOMMENDATIONS
    AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil is recommended for four-stroke engines. It is also recommended for transmissions in two- or four-stroke applications. It is an all-climate/all-season oil that replaces 0W-30, 0W-40, 5W-30, 10W-30 and 10W-40 oils for ATVs, UTVs, snowmobiles and other powersports equipment. Also recommended as a replacement for Polaris Synthetic PS-4 Plus and Arctic Cat Synthetic ACX. Manufacturers include Polaris®, Honda®, Yamaha®, Ski-Doo®, Can-Am® (Bombardier®), Suzuki®, Kawasaki® and Arctic Cat®.

    API SL/CF, SJ, SH, SG
    JASO MA/MA2
    ISO-L-EMA2

  • Amsoil INTERCEPTOR® Synthetic 2-Stroke Oil

    INTERCEPTOR® Synthetic 2-Stroke Oil

    (AIT)




    APPLICATIONS
    AMSOIL INTERCEPTOR Synthetic 2-Stroke Oil is engineered for use in direct-fuel-injected (DFI), electronic-fuel-injected (EFI) and carbureted two-stroke snowmobiles, including those made by Polaris*, BRP*/Ski-Doo* (Rotax* E-TEC* engines), Arctic Cat* (C-TEC 2) and Yamaha*.

    Use where API TC oils are specified. Use as injection oil or 50:1 premix (2.6 oz. per U.S. gallon of gas). INTERCEPTOR is compatible with most conventional and synthetic two-stroke oils; however, for best performance, mixing oils should be minimized.

  • DOMINATOR® Synthetic 2-Stroke Racing Oil

    Dominator® Synthetic 2-Stroke Racing Oil

    (TDR)




    Racers can’t win what they don’t finish. That’s why AMSOIL formulators built DOMINATOR® 2-Stroke Racing Oil. This complex blend of oils and additives directly addresses the heat, pressure and friction of race-engineered engines. These engines operate on the edge, yet engine reliability is critical. DOMINATOR does an outstanding job protecting high-performance engines. It adds durability that professional racing teams depend on and delivers confidence so engines can be pushed to the limit.

    • Excellent film strength for high-heat, high-rpm motors
    • Anti-friction formula for maximum power
    • Burns clean; helps prevent ring sticking and plug fouling
    • Protects coated and non-coated racing pistons

  • Amsoil SABER® Professional Synthetic 2-Stroke Oil

    SABER® Professional Synthetic 2-Stroke Oil

    (ATP)




    APPLICATIONS
    SABER Professional is specifically designed for handheld pre-mix two-stroke power equipment including, but not limited to, chainsaws, trimmers, blowers, brush cutters, edgers and shredder vacs.

    JASO FD, ISO-L-EGD, API TC
    Use at conventional mix ratios or the SABER® Ratio,™ regardless of the mix ratio specified for the equipment. For maximum benefit, use the SABER Ratio.

    MIX RATIO OIL FUEL
    Conventional 32:1 4.0 OZ 1 U.S. gallon
    Conventional 40:1 3.2 OZ 1 U.S. gallon
    Conventional 50:1 2.6 OZ 1 U.S. gallon
    SABER® Ratio™ 80:1 1.6 OZ 1 U.S. gallon
    SABER® Ratio™ 100:1 1.3 OZ 1 U.S. gallon
  • Amsoil Synthetic Chaincase & Gear Oil

    Synthetic Chaincase & Gear Oil

    (TCC)




    AMSOIL recommends Synthetic Chaincase & Gear Oil as a replacement for the following ATV and snowmobile original equipment manufacturer (OEM) fluids*:
    Arctic Cat*
    Chain Lube #4639-363
    Bombardier* / Ski-Doo* / Can-Am*
    XP-S Mineral Chaincase Oil #415129500
    XP-S Synthetic Chaincase Oil #293600138
    Polaris*
    Synthetic Gearcase Lube #2871280#2871478
    SCL Chaincase Lubricant #2872952#2873105#2873106
    Yamaha*
    Snowmobile Chaincase Lube #ACC-CHNCS-FS-08
  • Amsoil Shock Therapy Suspension Fluid #5 Light

    Shock Therapy Suspension Fluid #5 Light

    (STL)




    Recommendations
    Use AMSOIL Shock Therapy Suspension Fluid in front forks and shocks on snowmobiles, dirt bikes, motorcycles, ATVs and other racing and recreational-use vehicles, as well as cars and trucks that require suspension systems that perform in the most extreme conditions. Agitate the fluid before use. Shock Therapy Suspension Fluid Light #5 is the preferred choice for winter use.

    Use AMSOIL Shock Therapy Suspension Fluid Light #5 in suspension systems where less dampening and quicker rebounds are desired, including those made by Showa*, Kayaba*, Bilstein*, RydeFX*, Penske* and WP* forks; and RACETECH* (US1) and Custom Axis*.

    Use Shock Therapy Medium #10 (STM) in suspension systems where more dampening control and slower rebounds are desired, including those made by Ohlin*, FOX*, RACETECH (US2), Koni* and WP shocks; and Harley-Davidson* forks that recommend type “E” or “B” fork oil.

  • Amsoil Shock Therapy Suspension Fluid #10 Medium

    Shock Therapy Suspension Fluid #10 Medium

    (STM)




    Recommendations
    Use AMSOIL Shock Therapy Suspension Fluid in front forks and shocks on snowmobiles, dirt bikes, motorcycles, ATVs and other racing and recreational-use vehicles, as well as cars and trucks that require suspension systems that perform in the most extreme conditions. Agitate the fluid before use. Shock Therapy Suspension Fluid Light #5 is the preferred choice for winter use.

    Use AMSOIL Shock Therapy Suspension Fluid Light #5 (STL) in suspension systems where less dampening and quicker rebounds are desired, including those made by Showa*, Kayaba*, Bilstein*, RydeFX*, Penske* and WP* forks; and RACETECH* (US1) and Custom Axis*.

    Use Shock Therapy Medium #10 in suspension systems where more dampening control and slower rebounds are desired, including those made by Ohlin*, FOX*, RACETECH (US2), Koni* and WP shocks; and Harley-Davidson* forks that recommend type “E” or “B” fork oil.

  • Synthetic 2-Stroke Injector Oil

    Synthetic 2-Stroke Injector Oil

    (AIO)




    APPLICATIONS
    AMSOIL Synthetic 2-Stroke Injector Oil is recommended for use in all two-stroke outboard motor and snowmobiles. Meets the requirements for warranty protection protection by BRP®/Evinrude®/Johnson®/Ski-Doo® • Polaris® • Mercury® • Arctic Cat® • Yamaha® • Suzuki® • Kawasaki® • Mariner® • Force®

    Use as injection oil or 50:1 pre-mix (2.6 oz. per U.S. gallon of gas).

    For Evinrude factory-lean setting, use AMSOIL HP Marine Synthetic 2-Stroke Oil.